| Some, not all, of the hp laserjet printers will constantly reprint queued jobs until the printer is reset. The parameters listed below seem to fix the problem. - Execute /bin/jetadmin
- Select 5) Modify existing spooler queue(s)
- Enter one of the displayed printers which will result in the following:
Modifiable Queue Parameters
-----------------------------
Settings may be changed by selecting the corresponding numbers. You
can make as many changes as you want until '0' is selected.
To abort the operation, press 'q'.
Warning: Modifying a queue while printing a job may cause the job to
be cancelled and re-started again.
Options: Current Settings:
-------- -----------------
1) JobMonitor [ON]
2) Default Queue [NO]
3) Status Log [OFF]
4) Additional printer changes . . .
Select an item for change, or '0' to make the changes effective (q - quit): 4 Set the parameters appropriately or select 4 for more options. That will result in the following display:
Modifiable Printer Parameters
-----------------------------
Settings may be changed by selecting the corresponding numbers. You
can make as many changes as you want until 'q' is selected.
Options: Current Settings:
-------- -----------------
1) Job Recovery [OFF]
2) True End-of-Job [OFF]
3) Banner Page [ON]
4) Default Printing Language [AUTO]
5) PostScript Level [Level 2]
Select an item for change, or q when done: |